 |
|
 |
 Home > Water Treatment Plants > Aeration Tank Equipments |
 |
|
 |
|
|
|
|
 Surface Aerator
|
|
|
 Surface aeratoris usually installed in river or lake in which the water is shallow and the area is large as a floated type. It is usually used for domestic sewage treatment plants and the other industrial sewage treatment plants, a.k.a. standard active sludge process, and for oxidation ditch that has good dentifrication and P release.Besides, it also can be used for raw water inflow tank, stirring in order for preventing sludges sinking and uniformization, pure oxgen method process, and processing sludge stabilization.
Structure and Features
|
- Simple structure, easy maintenance, and outstanding delivering oxygen efficiency.
- This is very effective to freely adjust the amount of deliverying oxygen as adjusting flooding depth of aerator or rev count, and elastic driving is available.
- The one aerator’s deliverying oxygen ability is much better than the others. So, it is able to economically design heavy capacity plants.
- Because of the outstanding stirring effect, auxiliary equipments are unrequired although the water level is deep.
- The driving part has a long life and the 후록 in the aeration tank can not be broken because it is low-speed spinning.
|
|
|
|
| Submersible Aerator (pressurized)
|
|
|
Submersible aerator is free to install and move, and the structure is very simply designed. Especially, it is very outstanding at in-depth aeration, and very economic to save power of a ventilator.
The main locations are sewage treatment plants, industrial sewage treatment plants, wastewater disposal plants, and the main uses are aeration in disposal plants and stirring in coordination tank.
Features
|
- The lower level structure is made of stainless steel; it is outstanding corrison resistence, and special uses and long time use are available.
- Pipes of air blows are unrequired because of strong self-priming power, saving power cost, and developes microcytes in the aeration tanks, which delivering oxygen is very effective.
- It is very easy to maintain and install to anywhere because the structure is simple and less noise and trouble.
|
|
|
|
| Screw Pump
|
|
|
Screw pump certainly makes discharge amount up by constant-speed spinning screw in the trough by metal structures or sloped concrete structures.
|
|
|
| Grit Remover
|
|
|
It removes rapid precipitate, which is the reason of equipments’ abrasion, in order to prevent sand or mud piling up in continuous process.
|
|
|
| ludge-Mixer
|
|
|
Sludge mixer consists of propeller pump connected to motor, drive shaft, draft tube, and the other parts.
|
|
|
|
| Methane Gas Storage Tank
|
|
|
This is an equipment using gas caused from sludge digestion in digestion tank as adding temperature facility heat source such as boiler.
|
|
|
|
|
|
|
|
|
|
|
